SpecificationsNeedle diameter: 35 mmShaft length: 150 cmTotal weight: 6.8 kg How to useMaintenance and inspectionBefore any work on the machine itself, pull the mains plug.The brushes should be checked periodically and warm-out brushes should be replace in time,after replacing,inspect,whether the new brushes can move freely in the brush holder,keep running the motor for 15 minutes to match the contact of brushes and commentators.Keep the ventilation slots clear from dirt , clean off the accumulated dust and oil dirt periodically.During normal operation , if anything happens ,the power supply should be cut off at once and the tool should be checked and repairedRegular inspect all mounting screws and ensure that they are properly tightened, should any of the screws be loosen,Tighten them immediately, failure to do so could result in personal injuryDo not expose the tool to rain , Do not use power tools in damp or wet location ,keep work area well lit do not use power tools where there is risk to cause fire or explosion. FeatureHard Nose with flexible shaft for hard to reach placesShaft simply screws on to drive unit, no other tools requiredWidely used in constructionEasy to use labour saving tool to help settle concrete and remove air bubbles from slabs & footingsPackage Content1 × 1300W Concrete Vibrator1 × 1.5m Hose